Convenience feature (CF) left rear door control module diagnosis fault memory (Fault Code B1000, B1010, B1011, B1155, B1407, B1520) - AD80.45-P-4004A

MODEL 202 as of 1.6.97, 210.081 /281, 210 as of 1.3.97 

		Convenience feature (CF) diagnosis previous knowledge		AD80.45-P-2000A
		The fault memory can only be read out using the Hand-held Tester
a		Fuses O.K.
b		Ignition: ON
c		Connect Hand-held Tester (HHT), read out fault memory		AD00.00-P-2000-03A
d		Control module and CAN data cable voltages O.K.	General networking (GVN), electrical system testing	AD00.19-P-6000A
e		All CAN data cables connected
		Fault memory
Fault code		Fault text	Possible cause / note	Remedy
B1000		Rear driver-side door control module (N69/3)		N69/3
B1010		Voltage too low		AD00.19-P-6000A
B1011		Voltage too high		AD00.19-P-6000A
B1155		Rear left power window switch S21/3 (LHD), S21/4 (RHD) signal > 25 sec. or cables -		AD80.45-P-6000-08A
				AD80.45-P-6000-09A
B1407		Short circuit between rear driver-side door control module (N69/3) and left rear power window switch (S21/3) Left rear power window switch lamp (S21/3) Rear driver-side door control module end stage (N69/3)		Cables S21/3 N69/3
-006
B1520		Relay for rear driver-side power window motor (N69/3m1) does not activate		Rear driver-side door control module (N69/3)
-001
B1520		Relay for rear driver-side power window motor (N69/3m1) signal > 25 sec.		Rear driver-side door control module (N69/3)
-002
B1520		Rear driver-side power window motor (N69/3m1) Hall sensor power supply or		Rear driver-side door control module (N69/3)
-003
B1520		Rear driver-side power window motor (N69/3m1) Hall sensor turning in wrong direction		Rear driver-side door control module (N69/3)
-004
B1520		Rear driver-side power window motor (N69/3m1) Hall sensor 1 signal faulty		Rear driver-side door control module (N69/3)
-005
B1520		Rear driver-side power window motor (N69/3m1) Hall sensor 2 signal faulty		Rear driver-side door control module (N69/3)
-006