LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1997 >> E320 >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Anti-Theft & Central Locking System - Self-Diagnostic System - 210 Chassis >> Self-Diagnostic System >> Convenience feature (CF) diagnosis previous knowledge - AD80.45-P-2000A

Convenience feature (CF) diagnosis previous knowledge - AD80.45-P-2000A

MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 as of 1.3.97 

  Connection and use of testing tools   AD00.00-P-1000AZ
  Connect Hand-held Tester, read out fault memory   AD00.00-P-2000-03A
IMPORTANT Pay attention to vehicle coding in driver-side/ passenger-side door control module (N69/1, N69/2) and electronic ignition switch control module (N73)    
IMPORTANT For technical reasons, the basic CAN connection between the pneumatic control module (combined) (PSE) (A37) and the driver-side signal acquisition and actuation module (SAM) (N10/1) must always be connected.    
IMPORTANT Model 208 
The side windows can only be calibrated with the door closed.
   
REFER TO BASIC KNOWLEDGE Convenience feature (CF), arrangement of components   GF80.45-P-0003-01A
REFER TO BASIC KNOWLEDGE Convenience feature (CF), component networking   GF80.45-P-0003-02A
REFER TO SYSTEM WIRING DIAGRAMS Structure of electrical wiring diagrams Model 210 PE82.00-P-1100A
    Models 202, 208 PE82.00-P-1100D
REFER TO SYSTEM WIRING DIAGRAMS Sliding roof, soft top electrical wiring diagrams Model 210 PE77.00-P-1100A
    Models 202, 208 PE77.00-P-1100D
REFER TO SYSTEM WIRING DIAGRAMS Electrical wiring diagrams for doors Model 210 PE72.00-P-1100A
    Models 202, 208 PE72.00-P-1100C
  Convenience feature (CF) notes   AD80.45-P-2000-01A
  Convenience feature (CF) diagnosis tools   AD80.45-P-2000-02A 
  Convenience feature (CF) coding   AD80.45-P-2000-03A 
  Convenience feature (CF), notes on actual values   AD80.45-P-2000-04A 
  Convenience feature (CF), notes on fault memory   AD80.45-P-2000-05A