Function of acoustic alarm - GF80.50-P-4005A

MODEL 202 from 1.6.97 to 31.5.98, 208, 210 up to 31.5.98 with CODE (551a) Anti-theft alarm (ATA) 

The PSE control module (combined) (A37)  controls the acoustic  signal sequence. The sequence differs depending on the national version.

• EEC: Alarm horn (H3)  30 seconds long at intervals of 1.6 Hz
• : Alarm horn (H3)  60 seconds long at intervals of 1.6 Hz
• , , : Alarm siren with auxiliary battery (H3/1)  30 seconds at intervals of 1.6 Hz.

The alarm horn (H3)  is actuated directly by the PSE control module. The alarm siren with auxiliary battery (H3/1)  is actuated by the signal acquisition and actuation module (SAM) (N10/1)  via the CAN bus.

The alarm can be discontinued by activating  or deactivating  the ATA  . After discontinuation of the alarm the ATA remains active.

	Optical alarm, function		GF80.50-P-4006A
	Activating anti-theft alarm (ATA), function		GF80.50-P-2002B
		with code 882 (interior motion sensor)	GF80.50-P-2002C
	Deactivating anti-theft alarm (ATA), function		GF80.50-P-2003B
	Pneumatic system equipment (PSE) control module (combined) (A37), location/purpose/design/function		GF80.20-P-4106A