Xenon headlamps (XENON), electrical test - AD82.10-P-6001A
MODEL 208, 210 with CODE (612) Xenon headlamp unit
| Risk of death
caused by high voltage levels present at xenon headlamps. Risk of explosion/risk of fire due to highly flammable materials in the area of damaged xenon bulbs Risk of injury from UV light, hot components at xenon headlamps and glass splinters when xenon bulbs crack Risk of poisoning from inhaling mercury vapors and from swallowing/skin contact with poisonous salts and mercury compounds |
Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulating safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure the work area is adequately ventilated. | AS82.10-Z-0001-01A | |
| Xenon headlamps (XENON) diagnosis, previous knowledge | AD82.10-P-2001A | ||
|
|||
| Test | |||
| 1 | Left low beam, electrical test Xenon headlamps (XENON) | Vehicle with right / left-hand steering | AD82.10-P-6001-01A |
| 2 | Right low beam, electrical test of xenon headlamps (XENON) | Left-hand drive vehicle | AD82.10-P-6001-02A |
| 3 | Right low beam, electrical test of xenon headlamps (XENON) | Right-hand drive vehicle | AD82.10-P-6001-02B |