Special signal system diagnosis, function check - AD82.25-P-3003A
MODEL 202 as of 1.6.97, 210.081 /281, 210 (except 210.081 /281) as of 1.3.97
Official and emergency vehicles
| Special signal system, official and emergency vehicles, location of components | GF82.25-P-0001-01A | ||
| Special signal system diagnosis, advanced information | AD82.25-P-2003A | ||
| Special vehicle multifunction control module (SVMCM) | AD82.25-P-2001-02C | ||
| I | Battery voltage 11-14 V | ||
| II | Fuses in order | ||
| III | Lighting equipment in order | ||
| Function check | |||
| Scope of test | Operation/Requirement | Specified value | Possible cause/Remedy |
| Blue light and main beam superimposition | Switch on blue light on special signal system pushbutton control module (A48/1). | Blue light illuminates. The headlamps also flash depending on the control module adaptation. | Blue light Main-beam headlamps ↓ AD82.25-P-6003-02A Signal switch input ↓ AD82.25-P-6003-06A |
| Main beam superimposition with side light ON | Blue light ON, switch on side light. | Main-beam headlamps do not flash. | Side light input ↓ AD82.25-P-6003-03A |
| Trigger special signal using FAN switch (S4/2). | Operate FAN switch (S4/2). | A special signal is output for the period of operation (always complete continuous cycles) | Signal switch input ↓ AD82.25-P-6003-06A CAN ↓ AD00.19-P-6000-42A AD00.19-P-6000-42B AD00.19-P-6000-42C AD00.19-P-6000-43A AD00.19-P-6000-43B AD00.19-P-6000-43C AD00.19-P-6000-44A |
| Headlamp flasher | Operate headlamp flasher/highlamp switch.(S4s2) | Main-beam headlamps illuminate continuously for the period of operation | Switch ↓ AD82.25-P-6003-01A |