Emergency alarm diagnosis, function check - AD82.25-P-3002A

MODEL 202 as of 1.6.97, 210.081 /281, 210 (except 210.081 /281) as of 1.3.97 with CODE (934) Taxi emergency alarm 

	Emergency alarm activation switch, location		GF82.25-P-4100-01B
	Emergency alarm cancellation switch, location		GF82.25-P-4101-01A
	Emergency alarm diagnosis, advanced information		AD82.25-P-2002A
I	Battery voltage 11-14 V
II	Fuses in order
III	Lighting equipment in order
	Function check
Scope of test	Operation/Requirement	Specified value	Possible cause/Remedy
Trigger visual alarm with emergency alarm activation switch (S62/6)	Operate emergency alarm activation switch (S62/6) once. It is also possible to define in the control module adaptations that an active alarm is triggered as soon as the switch S62/6 is operated.	Visual alarm is triggered: Roof symbol light (E14/4) flashes, Two-way radio receives the control signal for the emergency call.	Activation switch ↓ AD82.25-P-6002-01A  Roof symbol light ↓ AD82.25-P-6001-03A  Two-way radio output ↓ AD82.25-P-6002-03A  Control module adaptations ↓ AD82.25-P-2001-02B
Trigger active alarm with emergency alarm activation switch (S62/6).	Visual alarm is already triggered  Operate alarm with emergency alarm activation switch (S62/6).	Active is triggered: Roof symbol light (E14/4) flashes, Two-way radio receives the control signal for the emergency call, Alarm horn (H3) sounds, Main-beam headlamps flash, Warning flasher system is activated, Interior lighting is switched on. Each partial function can be individually coded in the control module adaptations!	Activation switch ↓ AD82.25-P-6002-01A  Roof symbol light ↓ AD82.25-P-6001-03A  Two-way radio output ↓ AD82.25-P-6002-03A  Main-beam headlamps ↓ AD82.25-P-6003-02A  Warning flasher system ↓ AD82.25-P-1000AZ  Interior lighting ↓ AD00.19-P-3001A Control module adaptations ↓ AD82.25-P-2001-02B
Stop alarm with emergency alarm cancellation switch (S62/5)	Visual or active alarm is triggered  , operate emergency alarm cancellation switch (S62/5).	Alarm is stopped, all the actuators concerned return to the condition before the alarm was triggered.	AD82.25-P-6002-02A