Removing and installing door lock on rear door - AR72.12-P-2510E

MODEL 202 

Fig 1: Identifying Door Lock On Rear Door Remove/Install Components - Model 202 (1 Of 2)

Fig 2: Identifying Door Lock On Rear Door Remove/Install Components - Model 202 (2 Of 2)

	Removal, installation
1	Remove window crank		AR72.10-P-1100GV
2	Remove door liner on rear door		AR72.12-P-1010E
3	Remove exterior door handle on rear door		AR72.12-P-2410E
4	Remove bearing bracket
5	Pull foil off of inner door panel
6	Close crank window
7	Remove inner door actuation from rear door		AR72.12-P-2310E
8	Disconnect central locking line (6) from door lock
9	Unscrew screw (7) for lock cover (9)	Remove lock cover only together with door lock.
10	Unscrew screws (8) on door lock	Installation:  Tighten screws at front first	*BA72.12-P-1005-01A
11	Remove door lock through installation opening
12	Install in reverse order

REAR DOOR

Number	Designation		Model 202
BA72.12-P-1005-01A	Screws on door lock	Nm	8