Removing and installing fuel heat exchanger with thermostat - AR47.21-P-5620H

ENGINE 604, 605.910 /912 /960 /962, 606.912 /961 /962 /964

Shown on engine 605.910

Fig 1: Identifying Fuel Heat Exchanger With Thermostat Components (Shown On Engine 605.910)

G04633195

Fig. item, etc.	Work instructions
	Remove intake manifold, install.	Engine 604, 605.91	AR09.20-P-1310H
	Remove charge distribution pipe.	Engine 605.960/962	AR09.41-P-1310H
	Remove charge distribution pipe.	Engine 606.961/962/964	AR09.41-P-1310HA
	Remove resonance intake manifold, install.	Engine 606.912	AR09.20-P-1961H
	Coolant	Drain about 2 liters, fill up.
	O-rings and clamps	Examine for signs of damage and check if correctly located.
	Bolt of cable duct	Replace
		Bolts at fuel heat exchanger	*BA47.21-P-1001-01A
	Disconnect injection pipes, screw on	3+4 cyl. at injection pump (except engine 605.960/962 606)	AR07.12-P-9230H

TORQUE SPECIFICATION

Fuel preheating

Number	Designation		Engine 602.982/983, 603.971, 604, 605 except 605.911 606 except 606.910
BA47.21-P-1001-01A	Bolt to fuel heat exchanger	Nm	10