Removing and installing multifunction control module - AR54.21-P-0001F

MODEL 210 up to 28.2.97 with CODE (414a) Electric tilting/sliding roof, glass version 

Fig 1: Identifying Multifunction Control Module Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removal, installation
1	Remove cover on control module box.
2	Disconnect connector B on control module (N10)	Unhook connector before disconnecting.
3	Pull cable for connector B out through wire passage in control module box.
4	Open safety catch on control module.	Also pull catch lug back.
5	Pull control module (N10) out of guide rail
6	Disconnect multiple plug	Carefully disconnect and reconnect multiple plug in order to prevent damage to parts.
7	Reinstall in opposite order