Removing and installing rear engine mount - AR22.10-P-1160HV
ENGINE 112 in MODEL 210.081 /082 /281 /282 /282 with TRANSMISSION 722.6
ENGINE 113 in MODEL 210.083 /283 with TRANSMISSION 722.6
| Removing, installing | |||
| 1 | Support transmission | ||
| 2 | Unscrew screws (1) | *BA22.10-P-1002-01L | |
| 3 | Unscrew screws (2) | *BA22.10-P-1003-01L | |
| 4 | Remove support (3) | ||
| 5 | Slacken bolt (4) and push back | *BA22.10-P-1008-01L | |
| 6 | Unscrew screws (5, 6) | *BA22.10-P-1006-01L | |
| 7 | Remove engine mounts (8) with the two brackets (7) | Installation: The anti-twist locks (arrow) of the two brackets (7) must be located in the recesses (arrow) of the engine mount (8). |
|
| 8 | Install in the reverse order |
| Number | Designation | Engine 112.921/941, 113.940 in model 210.081/ 082/083/281/ 282/283 | ||
|---|---|---|---|---|
| BA22.10-P-1002-01L | Bolt of rear engine mount to rear engine crossmember | Nm | 35 | |
| BA22.10-P-1003-01L | Bolt of rear engine crossmember to body | Nm | 40 | |
| BA22.10-P-1006-01L | Bolt or nut, rear engine mount to transmission | M8 | Nm | 24 |
| M10 | Nm | 40 | ||
| BA22.10-P-1008-01L | Tensioning bolt of rear engine mount | Nm | 40 | |