Removal and installation of rear make up mirror holding clip - ra82001400016x(0016)
Model 140
| Make-up mirror | fold open, fold closed. |
| Mirror housing | open with screwdriver, close. |
| Retaining clip (1) | unclip downward, clip into place. |
NOTE:
The catches of the retaining clip (1) may be bent! For this reason, lock the retaining clip (1) before closing the mirror housing (arrow). After closing, release the clip again so that it is not damaged when the make-up mirror is folded up. To do this, press clip in the middle with a small screwdriver or pin.