Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262FA

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 120.982/983

Shown on left electronic accelerator actuator for right bank of cylinders (M16/4)

Fig 1: Identifying Electronic Accelerator Actuator With Throttle Valve Body - Engine 120.982/983

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig. item, etc.	Work instructions
	Remove air cleaner, install		AR09.10-P-1050F
	Electric connector (M16/1x1)	Must not chafe against intake air shaped hose
36	Gasket	Replace, clean sealing surface
38	Bolts		*BA30.20-P-1001-01A
	Bottom crankcase breather at actuator	Disconnect, fit on
	Purge control valve vacuum hose at actuator	Disconnect, fit on

ELECTRONIC ACCELERATOR ACTUATOR

Number	Designation		Engines 119, 120
BA30.20-P-1001-01A	Bolt, electronic accelerator to intake pipe	Nm	25