LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Climate Control - 140 Chassis) >> Basic Knowledge >> Blower, location/purpose/design/function - GF83.10-P-2102 >> Blower, location/purpose/design/function - GF83.10-P-2102A >> Notes

Blower, location/purpose/design/function - GF83.10-P-2102A: Notes

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 210 

MODEL 140 as of 1.9.95 

MODEL 202 

MODEL 208 

MODEL 170 

  Blower, location Model 210 GF83.10-P-2102-01A
  Blower, location Model 140 GF83.10-P-2102-01B 
    Model 202 up to 31.08.95 GF83.10-P-2102-01E
    Models 170, 208 and 202 as of 01.09.95 GF83.10-P-2102-01G
  Purpose In the fresh air mode the blower sucks fresh air in through the fresh air flap; in the recirculated air mode air is sucked through the recirculated air flap from the vehicle passenger compartment into the heater or air conditioning housing.
In the residual engine heat utilization mode the blower circulates the air in the passenger compartment.
 
  Design The blower is designed as a two-stage radial fan.  
  Blower, function Model 210, 140, 170, 208, 202 as of 09/95 GF83.10-P-2102-02A 
    Model 202 up to 31.08.95 GF83.10-P-2102-02B