LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Mixture Formation - 140 Chassis) >> Testing & Repair >> Removing and installing injection valves (LH-SFI) - AR07.03-P-6521 >> Removing and installing injection valves (LH-SFI) - AR07.03-P-6521F

Removing and installing injection valves (LH-SFI) - AR07.03-P-6521F

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 120.980 /981 

Fig 1: Identifying Injection Valves Components - Engine 120.980 /981
G04677817Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig. item, etc. Work instructions    
IMPORTANT Remove fuel rail together with injection valves, install (LH-SFI)   AR07.03-P-1452F 
12 Anti-twist lock at fuel injection valve IMPORTANT Anti-twist lock must engage in four-point lug (arrow) at fuel injection valve (Y62)  
14, 16/8 O-rings IMPORTANT Replace. Oil for installing.  
Y62 LH-SFI fuel injection valves    
REFER TO COMPONENT MODIFICATIONS LH-SFI fuel injection valves modified   BT07.03-P-0001-01A 
scientia non olet · About LEMON Manuals