Complete engine, crankcase ventilation, cylinder head, crankcase (engine 603) - AR01.00-Z-9603AB
ENGINE 603
| Testing compression pressure | ENGINE 601 in MODEL 124, 201, 202 ENGINE 602 in MODEL 124, 201 ENGINE 603 in MODEL 124, 126, 140 |
AR01.00-P-1200HW | |
| Remove/install engine | ENGINE 601, 602, 603... | AR01.10-P-2400HX | |
| Remove/install engine | ENGINE 603.913 /963 in MODEL 124 | AR01.10-P-2400HY | |
| Remove/install cylinder head | ENGINE 601 in MODEL 124, 201, 202 ENGINE 602 in MODEL 124, 201 ENGINE 603 in MODEL 124, 126, 140 |
AR01.30-P-5800HX | |
| Remove/install timing case cover | ENGINE 601, 602, 603... | AR01.40-P-8000HX | |
| Machining the crankcase contact surface | ENGINES 601, 602, 603 (except, 602.982) | AR01.40-P-9133AW | |
| Measuring cylinder bores | ENGINES 601, 602, 603 (except, 602.982) | AR01.40-P-9202AW | |
| Widening cylinder bore in crankcase | ENGINE 601, 602, 603 (except, 602.982) | AR01.40-P-9271AW | |
| Remove cylinder liner | ENGINE 601, 602, 603 (except 602.982) | AR01.40-P-9272AW | |
| Installing cylinder liner | ENGINE 601, 602, 603 (except, 602.982) | AR01.40-P-9273AW | |
| Boring and honing of cylinder bores | ENGINE 601, 602, 603 (except, 602.982) | AR01.40-P-9291AW | |
| Remove/install oil pan | ENGINE 603.913 /963 in MODEL 124 | AR01.45-P-7500HX | |
| Removing and installing oil pan | ENGINE 603.971 in MODEL 140 | AR01.45-P-7500HY | |
| Remove/install oil pan | ENGINE 601, 602, 603... | AR01.45-P-7500HZ |