LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Emission System (VIN A)) >> Rollover Valve Removal/Installation [PYUL] >> Disconnect Water Heater Component >> Notes

Disconnect Water Heater Component: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the water heater component.
Fig 1: Water Heater Components Location With Torque Specification
G16704230Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATION

Step Part name
1 Connector -
2 Clip
(See WATER HEATER COMPONENT REMOVAL NOTE )
(See CLIP REMOVAL NOTE )
-
3 Clip -
4 Clip -
5 Bolt 9.5 N.m {95 kgf.cm, 82 in.lb}
6 Water heater component -