DTC P2D87-00: Cooling Fan Motor System: Internal Malfunction (Over-Temperature Detection Inside The Motor) (PYUL)
WARNING: This page is about a different variant/trim than selected.
P2D87: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Cooling fan motor system: Internal malfunction (Over-temperature detection inside the motor) |
| Detection condition |
- The PCM detects cooling fan motor internal malfunction.
|
| Fail-safe |
- Inhibits engine-stop by i-stop control.
|
| Possible cause |
- Cooling fan motor malfunction (cooling fan motor internal malfunction) (Refer to [COOLING FAN MOTOR REMOVAL/INSTALLATION
]
).
- PCM malfunction (Refer to [PCM REMOVAL/INSTALLATION
]
).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Replicate the vehicle conditions at the time the DTC was detected using the following procedure.
WARNING:
- Observe legal speed limits when driving the vehicle and perform the procedure in a location where safety can be assured.
- To prevent an accident, work with two people when the vehicle is being driven (one person drives vehicle, other person operates M-MDS).
- Try to reproduce the malfunction by driving the vehicle based on the values in the freeze frame data/snapshot data.
|
| System Wiring Diagram |
|