LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Cooling System (VIN A)) >> Radiator Removal/Installation [PYUL] >> Remove Bracket >> Notes

Remove Bracket: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Perform the procedure with the condenser secured to the body with a string.
G16699232Courtesy of MAZDA MOTORS CORP.
  1. Remove using the procedure shown in the figure.
    Fig 1: Bracket, Fasteners And Bolts With Torque Specification
    G16699233Courtesy of MAZDA MOTORS CORP.
    TIGHTENING TORQUE SPECIFICATION

    Step Part name
    1 Bolt 11 N.m {110 kgf.cm, 95 in.lbf}
    2 Fasteners -
    3 Bracket
    (See Bracket installation note ).    		 -
scientia non olet · About LEMON Manuals