Inspect Coolant Concentration
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Use coolant at a concentration that meets the environmental conditions in which the vehicle is driven, otherwise engine damage could occur.
NOTE:
- Measure the concentration of coolant using a hydrometer and thermometer and verify that it is as indicated in the graph.
COMPONENT OPERATIONS
| Component no. | Refer to |
|---|---|
| 1 | Specific gravity |
| 2 | Coolant protection function (Except FL22 type) |
| 3 | Coolant temperature (°C {°F}) |
- If it is not as indicated in the graph, add water or coolant.