Remove Cooling Fan Motor
WARNING: This page is about a different variant/trim than selected.
WARNING:
- A hot engine can cause severe burns. Turn off the engine and wait until it is cool before performing the servicing.
- Remove in the order indicated in the table.
TIGHTENING TORQUE SPECIFICATION
| Step | Part name | |
|---|---|---|
| 1 | Connector | - |
| 2 | Wiring harness clip | - |
| 3 | Bolt | 9.5 N.m {95 kgf.cm, 82 in.lbf} |
| 4 | Hose | - |
| 5 | Bolt | 8.5 N.m {85 kgf.cm, 74 in.lbf} |
| 6 | Cooling fan motor | - |