DTC inspection
WARNING: This page is about a different variant/trim than selected.
- Perform a DTC inspection using the M-MDS to verify if any cooling fan motor-related DTCs are detected. (Refer to [DTC INSPECTION
] in the appropriate troubleshooting information
)
DTC is detected
- Inspect for possible causes of detected DTCs in the order from the top. (Refer to [DTC TABLE [PCM]
] in the appropriate troubleshooting information
)
- If the malfunction is not resolved, replace the cooling fan component. (See COOLING FAN MOTOR REMOVAL/INSTALLATION [PYUL] ).
- Inspect for possible causes of detected DTCs in the order from the top. (Refer to [DTC TABLE [PCM]
] in the appropriate troubleshooting information
)