Visual inspection (coolant switching valve No. 2)

WARNING: This page is about a different variant/trim than selected.

NOTE:

Perform the procedure with coolant switching valve No. 2 removed. (See COOLANT SWITCHING VALVE (CSV) REMOVAL/INSTALLATION [002] ).

Inspect coolant switching valve No. 2 for the following.
- Damage or cracking
- Clogging with dirt or foreign matter in the coolant passage of the coolant switching valve No. 2
- Coolant switching valve No. 2 is open (normal condition)
If a malfunction occurs
- Repair or replace the malfunctioning location. (See COOLANT SWITCHING VALVE (CSV) REMOVAL/INSTALLATION [002] ).