LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (VIN A) (2 Of 2)) >> Fuel Vapor Temperature Sensor Removal/Installation [PYUL] >> Remove Fuel Tank >> Notes

Remove Fuel Tank: Notes

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The following part is built into the fuel tank.
    • Fuel gauge sender unit (sub)
    • Non-return valve
    • Fuel vapor temperature sensor
    • Rollover valve
    • Fuel shut-off valve
  1. Remove in the order indicated in the table.
G16707574Courtesy of MAZDA MOTORS CORP.
PART NAME DESCRIPTION

Step Part name
1 Joint hose
(See Joint hose installation note ).
2 Fuel tank