LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (VIN A) (2 Of 2)) >> Fuel Vapor Temperature Sensor Removal/Installation [PYUL] >> Remove Fuel Tank >> Joint hose installation note

Joint hose installation note

WARNING: This page is about a different variant/trim than selected.
  1. Install the joint hose as shown in the figure.
G16702689Courtesy of MAZDA MOTORS CORP.
SYMBOL AND CONTENT DESCRIPTION

Symbol Content
1 Pipe marking
2 Hose marking
0-3 mm {0-0.1 in}