LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Fuel Tank Pressure Sensor Removal/Installation [PYUL] >> Remove Rear Bumper Bracket (LH) (With Rear Bumper Bracket (LH)) >> Notes

Remove Rear Bumper Bracket (LH) (With Rear Bumper Bracket (LH)): Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
G16707426Courtesy of MAZDA MOTORS CORP.
PART NAME DESCRIPTION

Step Part name
1 Rivet
(See Rivet removal note ).
Replacement part
2 Fastener -
3 Rear bumper bracket (LH) -