Remove Fuel Tank Pressure Sensor: Notes

1. Remove in the order indicated in the table.

Step 1 

Fig 1: Fuel Tank Pressure Sensor Components Location With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

Step	Part name
1	Evaporative isolation valve hose (See Evaporative isolation valve hose connection note ).	-
2	Evaporative hose No. 1	-
3	Nut (See Nut and bolt installation note ).	11 N.m {110 kgf.cm, 95 in.lb}
4	Bolt (See Nut and bolt installation note ).	11 N.m {110 kgf.cm, 95 in.lb}
5	Connector	-
6	Wiring harness clip	-
7	Canister ventilation valve component	-

Step 2 

Courtesy of MAZDA MOTORS CORP.

Step	Part name
1	Hose clip	-
2	Quick release connector (emission system) No. 5 (See Quick release connector (emission system) No. 5 disconnection note ). (See Quick release connector (emission system) No. 5 connection note ).	Engine oil
3	Fuel tank pressure sensor	-