LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL] >> Remove Intake Air Guide (Upper) >> Notes

Remove Intake Air Guide (Upper): Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove using the procedure shown in the figure below.
G16699234Courtesy of MAZDA MOTORS CORP.
PART NAME DESCRIPTION

Step Part name
1 Intake air guide (upper)
(See Intake air guide (upper) removal note ).
scientia non olet · About LEMON Manuals