Remove Windshield Wiper Motor And Link: Notes
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Always apply protective tape to the windshield edge. If the windshield wiper motor and link contacts the windshield, it could damage the windshield.
SYMBOL AND CONTENT DESCRIPTION
| Symbol | Content |
|---|---|
| Protective tape attachment positions |
- Remove using the procedure shown in the figure below.
TIGHTENING TORQUE SPECIFICATIONS
| Step | Part name | |
|---|---|---|
| 1 | Connector | - |
| 2 | Bolt (See Bolt installation note ). |
8.0 N.m {82 kgf.cm, 71 in.lb} |
| 3 | Windshield wiper motor and link | - |