LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Camshaft Position (CMP) Sensor Removal/Installation [002] >> Remove Windshield Wiper Motor And Link >> Bolt installation note

Bolt installation note

WARNING: This page is about a different variant/trim than selected.
  1. Install the bolts shown in the figure below.
Fig 1: Windshield Wiper Motor And Link Bolts Tightening Sequence
G16699177Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Symbol Content
Temporarily tighten
8.0 N.m {82 kgf.cm, 71 in.lb}