LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Starting System (VIN A)) >> Starter Removal/Installation [PYUL] >> Remove Windshield Wiper Motor And Link >> Notes

Remove Windshield Wiper Motor And Link: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Always apply protective tape to the windshield edge. If the windshield wiper motor and link contacts the windshield, it could damage the windshield.
G16704500Courtesy of MAZDA MOTORS CORP.
SYMBOL AND CONTENT DESCRIPTION

Symbol Content
Protective tape attachment positions
  1. Remove using the procedure shown in the figure.
Fig 1: Windshield Wiper Motor And Link, Connector And Bolt With Torque Specification
G16704501Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATION

Step Part name
1 Connector -
2 Bolt
(See Bolt installation note ).
8.0 N.m {82 kgf.cm, 71 in.lbf}
3 Windshield wiper motor and link -