LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (On-Board Diagnostic - Pcm (VIN A) (3 Of 4)) >> DTC P117A-00: Engine Oil Temperature Is High >> Function Inspection Using M-MDS

Function Inspection Using M-MDS

WARNING: This page is about a different variant/trim than selected.
P117A: 00 (PCM (PYUL)) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION 
  • Record the freeze frame data/snapshot data.
    NOTE:
    • Recording can be facilitated using the screen capture function of the PC.
- Go to the next step.
2 PURPOSE: INSPECT FOR OTHER RELATED DTCs 
  • Perform the DTC inspection for the PCM. (See DTC INSPECTION .)
  • Are any of the following DTCs displayed?
    • P0335: 00
    • P059F: 00
    • P05A0: 00
    • P05A3: 00
    • P05C0: 00
    • U0284: 00
Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
(See P0335-00: (PYUL) .)
(See P059F-00: (PYUL) ).
(See P05A0-00: (PYUL) ).
(See P05A3-00: (PYUL) ).
(See P05C0-00: (PYUL) ).
(See U0284-00: (PYUL) .)
No Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.