DTC P0615-00: Starter/Starter Relay Operation Amount
WARNING: This page is about a different variant/trim than selected.
P0615: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Starter/starter relay operation amount |
| Detection condition |
- The number of times the engine has been started has reached the warrantied performance frequency for the starter or starter relay
|
| Fail-safe |
- Inhibits engine-stop by i-stop control.
|
| Possible cause |
- Starter and/or starter relay malfunction (the number of times the engine has been started has reached the warrantied performance frequency for the starter or starter relay) (Refer to [STARTER REMOVAL/INSTALLATION
] in service information). (Refer to [RELAY LOCATION
] in service information).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the KOEO or KOER self test. (See DTC INSPECTION
.)
|
| System Wiring Diagram |
|