LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical System (VIN Y)) >> Engine Tune-Up (VIN Y) >> Ignition Timing Inspection

Ignition Timing Inspection

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The ignition timing cannot be adjusted.
  • The M-MDS is required to verify the ignition timing.
  1. Complete the engine tune-up preparation. (See ENGINE TUNE-UP PREPARATION .)
  2. Verify the ignition timing (PCM PID: SPARKADV) using the PID/data monitor function of the M-MDS. (See PCM INSPECTION (VIN Y) .)

    Ignition timing 

    Approx. BTDC 21°

  3. Verify that ignition timing advances when the engine speed increases gradually.
    • If there is a malfunction, refer to the symptom troubleshooting.
scientia non olet · About LEMON Manuals