Idle Mixture Inspection

WARNING: This page is about a different variant/trim than selected.

Verify that the idle speed and ignition timing are within the specification. (See IDLE SPEED INSPECTION .) (See IGNITION TIMING INSPECTION .)
Insert an exhaust gas analyzer into the tailpipe.
Verify that the CO and HC concentrations are within regulation.
- If there is a malfunction, refer to the symptom troubleshooting.
  - If no malfunction is detected, replace the catalytic converter. (See EXHAUST SYSTEM REMOVAL/INSTALLATION (VIN Y) .)
CO concentration

Within the regulation

HC concentration

Within the regulation