LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Liftgate Side Trim Removal/Installation

Liftgate Side Trim Removal/Installation

  1. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
  2. Move the hooks in the direction of the arrows shown in the figure to disengage them from the strap hangers.
    G16376922Courtesy of MAZDA MOTORS CORP.
  3. Pull the point A of the strap hanger as shown in the figure.
    G16376923Courtesy of MAZDA MOTORS CORP.
  4. Remove the fastener.
    G16376924Courtesy of MAZDA MOTORS CORP.
  5. Hold the shaded areas shown in the figure and detach the clips while moving the liftgate side trim in the direction of the arrow.
    G16376925Courtesy of MAZDA MOTORS CORP.
  6. Hold the shaded areas shown in the figure and partially peel back the edge of the liftgate side trim in the direction of arrows (1) to detach the tabs, move the liftgate side trim in the direction of arrow (2) with the tabs detached and remove the liftgate side trim while detaching the hook.
    G16376926Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals