LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> FRONT UNDER COVER No. 1 REMOVAL/INSTALLATION

FRONT UNDER COVER No. 1 REMOVAL/INSTALLATION

  1. Lift up the vehicle.
  2. Remove the front under cover No. 2. (See FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION .)
  3. Remove the screws and fasteners shown in the figure.
    G16376706Courtesy of MAZDA MOTORS CORP.
  4. Remove the front under cover No. 1 in the direction of the arrow shown in the figure while detaching the guide.
    G16376707Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals