LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-9 Signature >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Trunk End Trim Removal/Installation

Trunk End Trim Removal/Installation

  1. Remove the following parts:
    1. Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION .)
    2. Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION .)
    3. Trunk side pocket (See TRUNK SIDE POCKET REMOVAL/INSTALLATION .)
  2. Partially peel back the weather strip.
    G11435033Courtesy of MAZDA MOTORS CORP.
  3. Pull the trunk end trim in the direction of the arrow in the order of (1), (2) and remove it while detaching the clips, pin A and pin B.
    G11435034Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals