LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-9 Signature >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Trunk Side Pocket Removal/Installation

Trunk Side Pocket Removal/Installation

  1. Remove the trunk covering. (See TRUNK COVERING REMOVAL/INSTALLATION .)
  2. Remove the trunk board. (See TRUNK BOARD REMOVAL/INSTALLATION .)
  3. Using the remover tool, remove the trunk side pocket (LH) in the direction of the arrow shown in the figure while detaching the clips.
    G11435035Courtesy of MAZDA MOTORS CORP.
  4. Remove the trunk side pocket (RH) in the direction of the arrow shown in the figure.
    G11435036Courtesy of MAZDA MOTORS CORP.
  5. Using the remover tool, remove the trunk side bracket in the direction of the arrow shown in the figure while detaching the clips.
    G11435037Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals