Idle Mixture Inspection
WARNING: This page is about a different variant/trim than selected.
- Verify that the idle speed and ignition timing are within the specification. (See Idle Speed Inspection ).
(See Ignition Timing Inspection ).
- Insert an exhaust gas analyzer into the tailpipe.
- Verify that the CO and HC concentrations are within regulation.
- If there is a malfunction, refer to "ENGINE SYMPTOM TROUBLESHOOTING". (See SYMPTOM DIAGNOSTIC INDEX
).
- If no malfunction is detected, replace the catalytic converter. (See EXHAUST SYSTEM REMOVAL/INSTALLATION
).
CO concentration
Within the regulation
HC concentration
Within the regulation
- If no malfunction is detected, replace the catalytic converter. (See EXHAUST SYSTEM REMOVAL/INSTALLATION
).
- If there is a malfunction, refer to "ENGINE SYMPTOM TROUBLESHOOTING". (See SYMPTOM DIAGNOSTIC INDEX
).