LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Emission System (VIN Y)) >> Check Valve (Emission System) Removal/Installation >> Ejector Side >> Notes

Ejector Side: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION ).
  2. Remove in the order indicated in the table.
    G13672688Courtesy of MAZDA MOTORS CORP.
    PART DESCRIPTION

    1 Cover
    2 Evaporative hose
    3 Check valve (ejector side)
    (See Check valve (ejector side) installation note ).
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals