On-Board Diagnostic - Instrument Cluster

• Foreword
  • Notes
  • Troubleshooting Procedure
  • Action for Non-repeatable Malfunction
• Active Command Modes Inspection
• Active Command Modes TABLER
• Clearing DTC
  • CMDTC Memory Clearing Procedure
  • ODDTC Memory Clearing Procedure
• DTC Inspection
  • CMDTC Self Test
  • ODDTC Self Test
  • Snapshot Data
• DTC Table
• DTC U0001-88/U0010-88/U0100-00/U0101-00/U0121-00/U012B-00/U0131-00/U0140-00/U0151-00/U0156-00/U0182-00/U0207-00/U0214-00/U0232-00/U0235-00/U023A-00: Communication Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0300-00: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0401-68: Error Signal Received From Pcm [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0402-68: Error Signal Received From TCM [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0422-68: Error Signal Received From BCM [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0515-68: Error Signal Received From Start Stop Unit [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2005-86: Error Signal Received From Pcm [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2013-13: Cluster Switch Circuit Malfunction [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2100-00: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2105-02: Drive Selection Switch Circuit Malfunction [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2300-41: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2300-51: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2300-56: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2300-57: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U3000-41: Instrument Cluster Internal Malfunction [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U3003-16: Low Power Supply Voltage Input To Instrument Cluster [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• On-Board Diagnostic Wiring Diagram
• PID/Data Monitor Inspection
• PID/Data Monitor Table