LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Signature >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Oil Seal Replacement [FW6AX-El, GW6AX-El] >> Transfer Oil Seal (RH) No. 3

Transfer Oil Seal (RH) No. 3

  1. Drain the transfer oil. (See TRANSFER OIL REPLACEMENT [FW6AX-EL, GW6AX-EL] .)
  2. Remove the front drive shaft (RH). (See FRONT DRIVE SHAFT REMOVAL/INSTALLATION .)
  3. Remove the transfer oil seal (RH) No. 1. (See Transfer Oil Seal (RH) No. 1 .)
  4. Remove the oil seals using a tape-wrapped flathead screwdriver.
    G09075114Courtesy of MAZDA MOTORS CORP.
  5. Using the SST and a hammer, tap the new seal into place.
    G11427302Courtesy of MAZDA MOTORS CORP.
  6. Apply the lip of the oil seal with transfer oil.
  7. Install the transfer oil seal (RH) No. 1. (See Transfer Oil Seal (RH) No. 1 .)
  8. Install the front drive shaft (RH). (See FRONT DRIVE SHAFT REMOVAL/INSTALLATION .)
  9. Add the specified amount and type of oil. (See TRANSFER OIL REPLACEMENT [FW6AX-EL, GW6AX-EL] .)
scientia non olet · About LEMON Manuals