Slow Engaging After Operating Selector Lever From N To D Position: Notes

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

SLOW ENGAGING AFTER OPERATING SELECTOR LEVER FROM N TO D POSITION (ET6A-EL, ET6AX-EL) DESCRIPTION AND POSSIBLE CAUSE

Troubleshooting item	Slow engaging after operating selector lever from N to D position
Description	Slow engagement when depressing the accelerator pedal just after operating the selector lever from N to D position with the ATF temperature at 60°C {140°F} or more. Malfunction symptom only occurs once when accelerating from a standstill. Engagement after operating the selector lever from N to R position is normal. Engagement when shifting gears while driving is normal. DTCs are not stored.
Possible cause	Insufficient TCM learning (Insufficient learning in N to D position) Low clutch piston malfunction Low clutch hydraulic system sealing malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable