Abnormal Shifting (Us): Notes
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
ABNORMAL SHIFTING (ET6A-EL, ET6AX-EL, US) DESCRIPTION AND POSSIBLE CAUSE
| Troubleshooting item |
Abnormal shifting |
| Description |
- Shifts incorrectly (incorrect shift pattern).
|
| Possible cause |
- Signal malfunction
- APP sensor malfunction
- BARO sensor malfunction
- Brake switch malfunction
- CKP sensor malfunction
- ECT sensor malfunction
- IAT sensor No. 1 malfunction
- Low-G (XY) sensor (built into sophisticated airbag sensor (SAS) control module) malfunction
NOTE:
- When driving on high-altitude roads, the TCM determines that the driving mode is the AAS mode, and may change to a different shift timing from the normal timing.
- When SPORT mode is selected, a gear lower than NORMAL mode is selected, and the gear is maintained for a longer period of time. (with drive selection switch)
- If the engine coolant temperature is low, a gear lower than when in NORMAL mode is selected.
|
| System wiring diagram |
|
| Connector diagram |
|