C-Pillar Trim Removal/Installation

Replacement part 

Clip D

Quantity: 1

Location use: C-pillar trim

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
2. Remove the trunk side upper trim. (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION .)
3. Partially peel back the seaming welt.
4. Partially peel back the weatherstrip.
5. Disconnect the connector. (with Bose®)
6. Pull the C-pillar trim in the direction of the arrow in the order of (1), (2) while detaching clip A, clips B, clips C and clips D.
7. Install in the reverse order of removal.
   NOTE:

   • When replacing the C-pillar trim, remove the rear side speaker. (See REAR SPEAKER REMOVAL/INSTALLATION .)
   • When replacing the C-pillar trim, remove the rear speaker grille. (See SPEAKER GRILLE REMOVAL/INSTALLATION .)