Diagnostic assist code "01" CD Player Inspection
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Input diagnostic assist code "01" according to the diagnostic assist code input procedure. (See DIAGNOSTIC ASSIST CODE INPUT PROCEDURE .)
- After inputting the diagnostic assist code, insert the CD into the CD player within 10 s.
Inspection Display of center display (Diagnostic result) Content Action - Launch the CD player inspection mode.
- Verify the inspection result.
CD OK CD is normal. - After inspection, a malfunction is not detected.
- The CD player is operating normally.
CD Mechanical Linkage Failure CD read failure - Disc is not loaded normally due to a malfunction (damage or deformation) on disc or CD player malfunction.
- Verify that CD is not damaged or deformed.
If there is a malfunction:
- Re-perform the inspection using a normal CD.
If there is no malfunction:
- Replace the CD player.
(See CD PLAYER REMOVAL/INSTALLATION .)
CD Signal Plausibility Failure CD data format error - Disc is loaded, but system detects disc which CD player cannot read.
- Replace with a compatible CD.
- Replace with CD containing music data in the data format (CD DA)/MP3/WMA (Windows Media Audio)/ACC (Advance Audio Coding).
- Cancel the diagnostic assist function according to the ending procedure. (See ENDING PROCEDURE .)