LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (On-Board Diagnostic - Connectivity Master Unit) >> Diagnostic Assist Function [Connectivity Master Unit] >> Diagnostic Assist Code Input Procedure >> Ending Procedure

Ending Procedure

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. While the inspection is being performed, press "END" to return to the diagnostic assist code input screen.
    NOTE:
    • The diagnostic assist function cannot be canceled while the diagnostic assist function is being inspected.
  2. Cancel the diagnostic assist function by pressing "EXIT".
NOTE:
  • If the diagnostic assist function is canceled, it returns to a different screen depending on the way in which the diagnostic assist function was launched.
    • If launched using the commander switch: The screen directly before launching the diagnostic assist function
    • If launched not using the commander switch: The setting screen
scientia non olet · About LEMON Manuals