LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (On-Board Diagnostic - Connectivity Master Unit) >> Diagnostic Assist Function [Connectivity Master Unit] >> Diagnostic Assist Code Input Procedure >> Using center display

Using center display

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Input the diagnostic assist code by pressing the "Diagnostic assist code input switch".
  2. Press "ENTER".
  3. Perform the inspection according to the diagnostic assist code list. (See DIAGNOSTIC ASSIST CODE LIST .)
NOTE:
  • If [- REJECTED] is displayed, the inspection cannot be performed because communication is not enabled between the related parts, or the conditions are not met even if communication is enabled. Therefore, verify the display [- REJECTED] referring to the following procedure. (See [- REJECTED] IS DISPLAYED .)
scientia non olet · About LEMON Manuals