[- REJECTED] is displayed
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Switch the ignition off.
- Launch the diagnostic assist function. (See ACTIVATION PROCEDURE .)
- Input the diagnostic assist code. (See DIAGNOSTIC ASSIST CODE INPUT PROCEDURE .)
- Verify that [- REJECTED] is not displayed.
- If [- REJECTED] is displayed, perform the DTC inspection or inspect the part related to the diagnostic content. (See DTC INSPECTION [CONNECTIVITY MASTER UNIT] .)