Diagnostic Assist Code "03/04/05/06" DTC Inspection

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Verify the module to be inspected for DTCs referring to the chart, then input the diagnostic assist code according to the diagnostic assist code input procedure. (See DIAGNOSTIC ASSIST CODE INPUT PROCEDURE .)

NOTE:

The combination of DTC and diagnostic assist code can be verified in the DTC table. (See DTC TABLE [CONNECTIVITY MASTER UNIT] )
Detection of DTCs is limited if the ignition is in the ACC position.

x: Applicable-: Not applicable

Diagnostic assist code

Modules which can be verified for DTC

Connectivity master unit (CMU)

Tuner and amp unit (TAU)

CD player

03⁽¹⁾

⁽¹⁾	List of DTCs which can detect diagnostic assist codes "04", "05", and "06" is displayed.

If a DTC is displayed, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [CONNECTIVITY MASTER UNIT] .)
Cancel the diagnostic assist function according to the ending procedure. (See ENDING PROCEDURE .)